CID Heads BE 4.0 LS3 Intake Manifold.

The CID Heads BE 4.0 LS3 intake manifold is designed for engine applications aiming to make 600+HP using LS3 cylinder heads with a single plane intake. The CID Heads BE LS3 intake manifold has an overall height of 9.5" and unmatched HP producing characteristics amongst all cast single plane manifolds. It features a square carb pad designed to suit a 4500 Dominator carburetor or throttle body.

*The roof of the LS3 manifold is designed to line up with the roof of a LS3 cylinder head. The port opening on the manifold is not as tall as a factory LS3 port. Testing has shown that leaving the opening on the manifold at its cast height works best. Enlarging the port opening by dropping the floor at the flange to match a LS3 port will reduce taper in the runner and can harm performance.*

•  Fuel injected version. Comes with - 10 fuel rails and mounting hardware. 
• The BE LS3 intake manifold is designed for 600+ HP street, race and marine applications.
• Near equal length runners that are 4" in area at the plenum opening with enough material to increase area to 5.5" at plenum
• Designed to fit modified GM LS3 port openings
• Intake Manifold suits a 9.24" deck block
• Made in Ohio USA
• Made to order and a "Final Sale"

• Comes with - 10 fuel rails and mounting hardware. 
• Suits EV1 Long Fuel Injectors
• 4.0" CSA at plenum end of runner
• 9.24"" deck height
• 4500 Carburetor bolt spacing and opening
• 9 1/2" tall. Can be milled down to 9".

WHAT'S IN THE BOX

One CID Heads 4500 BE 4.0 LS3 Intake Manifold. Comes with fuel rails and mounting hardware. 

*All photos are for illustration purposes only*